If you’re working on a commercial or industrial build that requires heavy-duty alignment or load-bearing precision, metal shims are the answer. In this guide, we look at where and when they’re the right fit, how they differ from plastic shim alternatives and what to consider when specifying for your project.
What Are Metal Spacers Used For?
Metal shimming components are used when high compressive strength is required. They’re installed under base plates, machinery, steel columns or precast panels to level or align components, especially in high stress or long-term load critical environments.
Because they’re made from galvanised or stainless steel they also offer greater resistance to heat and deformation compared to non-metallic options.
Common uses include:
- Structural steel fabrication
- Tilt-up and precast panel installations
- Machinery or equipment levelling
- Cladding and façade installations
- Long-span or load-critical assemblies
While plastic packers are more common for general purpose use, metal versions are used for engineered designs that require superior load retention or performance under pressure.
Contact us if you are looking for plastic options instead.
Benefits of Steel or Galvanised Packers
- High-load tolerance – Suitable for bearing heavy structural loads without compression
- Dimensional consistency – Manufactured to tight tolerances for uniform levelling
- Thermal durability – Can be used in high-temperature or fire-rated assemblies
- Corrosion protection – Galvanised and stainless variants withstand harsh site conditions
Where safety and compliance is non-negotiable, metal is the specifier’s choice.
Benefits of Steel or Galvanised Packers
If you’re unsure whether your project requires steel spacers or another material it usually comes down to:
Consideration
- Load Requirements
- Heat Exposure
- Longevity
- Structural Certification
Choose Metal If…
- Load is high and plastic may deform
- Installed near hot works, machinery or fire-rated zones
- Long-term, non-serviceable installations
- Compliance documentation requires steel
In most cases plastic is more than sufficient. But when engineers call for steel it’s usually for a reason.
Custom Cut Steel Shims for Your Project
At PP Shim, we supply pre-cut and custom-cut metal shim products to construction companies across Australia. Whether you’re installing facade panels, levelling heavy plant or need precision-ground support for long-span assemblies we can fabricate to suit.
- Cut to size for exacting site requirements
- High-performance finishes including galvanised or stainless
- Engineering-grade precision and technical support
- Bulk and project-based supply options
Need Guidance on Large or Complex Projects?
We’ve supplied engineered shims for hundreds of commercial and government projects Australia-wide. Our team works directly with builders, engineers and installers to deliver compliant, site-ready solutions.
Whether you’re managing a panel install or large machinery setup we’ll help you select the right mix of materials and sizes for structural integrity and peace of mind.
Ready to get started? Use our contact form or call 02 4646 1166 for advice on your upcoming job.
Steel Spacers FAQs
Are These Suitable for External Use?
Yes, especially if using stainless or galvanised versions. These are corrosion-resistant and suited to outdoor or marine environments.
Can I Use These Under Machinery?
Absolutely. They’re commonly used in industrial setups where plastic options might compress or shift over time.
Are Certifications Available?
Yes. We can supply materials with traceability and certification for structural applications.
